Exam 2 - Window 2000 Professional 70-210 Certification Practice Exams

Hardware

PRACTICE EXAMS

to ace your MCSE 70-210 Windows 2000 Professional Certification Test

HARDWARE

you do NOT want to install unsigned drivers
change driver signing from WARN to BLOCK

win 3.x, win 95, and win NT 3.51 do NOT support
multilink modem connections

DOS applications usually run in Full Screen and use these monitor settings
640 x 480 and 256 colors

all multilinked modems will run at the speed of the
slowest modem

to have multilink work you must enable multilink on your computer and
enable it on the server

drivers can be disabled in
Device Manager or Recovery Console

hardware drivers built-in to the motherboard are disabled in
the CMOS setup

If the USB device does not appear in Device Manager then USB may NOT
be enabled in the CMOS setup

If the USB device is enabled in BIOS but does NOT appear in Device Manager or a yellow exclamation appears next to the controller then
contact the manuf for a new version of the BIOS

to enable multiple processor use you may have to
install a MPS compliant driver for the second processor via device manager to update the HAL

the newest power mgmt protocol that combines APM with PnP
ACPI

Hardware

Manage, configure, and troubleshoot:

hardware devices
drivers
multilinked modems
MPS drivers for multiple CPUs
power management systems
laptops

1. WDM device drivers are supportd by ___ ?

win 98 & win 2000
win NT4 & win 2000
win 98, win NT4, & win 2000

2. To put a laptop computer in the hibernate mode you must have ___ ?

the power meter tab selected in control options
APM enabled
at least as much disk space as RAM

3. You have a computer that can support two multilinked modem connections. You have three 14.4K, two 28.8K, and one 56K in stock to choose from. Which of the following choices will provide the greatest bandwidth?

one 56K and one 14.4K
two 28.8s
two 14.4s

4. After starting your computer you add a USB camera to your new Windows 2000 Professional computer but the device does not function. You go to Device Manager and the device is not listed. What should you do to install the USB camera?

Enable USB support in the BIOS
use Add Remove Hardware wizard
add the camera first then start the computer

5. To enhance the performance of a client's Win 2000 Professional computer you install a 2nd CPU. After rebooting the system you notice their is no increase in speed. What should you do to make your system use both processors?

There's nothing you can do. Only Win 2000 server can use two CPUs
Install a MPS compliant driver for the second processor via device manager
Use the add/remove program wizard to install the 2nd CPU

Grade =
Correct answers are: