Exam 9 Network+ Certification Practice Exams

Exam 9

WHAT TO KNOW

to ace your Comptia Network+ Certification Exam

with MOST of the type of questions you'll likely see on the test!

Net 1

Net 2

Net 3

Net 4

Net 5

Net 6

Net 7

Net 8

Net 9

Net 10

1. In addition to DNS, DHCP, and Active Directory to boot from an RIS server in Win 2000 requires a ___ compliant NIC?
RAS
PXE
SAP

2. the most popular dial-up protocol?
SLIP
UDP
PPP

3. the standard for several hubs connected in a linear fashion (token-bus)?
802.3
802.4
802.5

4. The minimum number of disks required to implement a fault tolerant RAID system?
1
2
3

5. For increased security Win 2000 enables encryption of files or folders on ___ volumes?
FAT32
NTFS
either FAT32 or NTFS

6. Characteristic of the TCP protocol?
fast but unreliable delivery
best effort delivery
assurance of packet delivery

7. Cable type that offers the least resistance to EMI?
coaxial
fiber-optic
UTP

8. Novell introduced TCP/IP as its default protocol in NetWare ___ ?
3.x
4.x
5.x

9. This OSI layer packages bits into frames?
physical
data-link
network

10. Protocol used in Win 2000 to print to a URL on the internet. It requires either Peer Web Services or a IIS server to be installed?
IPP
SAP
IPSec

11. Characteristic of an IEEE 802.3 10BaseT Ethernet network?
BNC T-connectors
RJ-11
UTP

12. You suspect a faulty NIC is causing a broadcast storm in a network. What troubleshooting tool would you use to locate which computer has the defective NIC?
VOM
protocol analyzer
TDR

13. A dial-up protocol that does not support automatic IP addressing using DHCP?
PPP
DLC
SLIP

14. Of the two types of routers the one that uses the discovery process to create its routing table?
static
dynamic
multiplexed

15. Your client's NT server has been having trouble booting. Where should you look first for some answers?
performance monitor
event viewer
SNMP

16. Another fast non-routable protocol with low overhead developed by DEC?
ATM
LAT
SPX

17. You are hired to setup a 100Mbps Ethernet network for a client in an office that already has cat 3 UTP installed. Your client wants to keep the costs to a minimum but needs the 100Mbps throughput. What should you recommend?
keep the existing cable but purchase 100Mbps hubs
keep the existing cable but use 100Mbps patch cable from the wall outlet
new cat 5 UTP and if not already installed 100 Mbps hubs and 100 Mbps NICs

18. Your client's 10BaseT Ethernet network using NetBEUI wants to access data on an IBM mainframe. What device will allow this connection?
bridge
gateway
router

19. Of the following protocols which is the fastest?
TCP/IP
IPX/SPX
UDP/IP

20. Access to files and folders in Win 2000 is accomplished using ___ ?
compression
tunneling
permissions

Grade =
Correct answers are:

Net 1 | Net 2 | Net 3 | Net 4

Net 5 | Net 6 | Net 7 | Net 8 | Net 9 | Net 10

Additional