5/27/00 - Start with the basic wing spar...
6/4/00 - ...add the D-section ribs and conduit to run wires...
6/8/00 - ...then attach the wing skins...
6/11/00 - ...and finally add the aft spar
10/29/00 - A view of the inside of the wing with the BID tapes added and fuel vent tube installed
11/19/00 - 2 of the 4 wing ribs added, and the aileron pushrod pass-thru tubes in place
5/11/01 - Wing ribs and aileron pushrod pass-thru tubes bonded in, holes for bellcrank brackets drilled, and fuel cap flanges glassed in
5/27/01 - Fuel pickup tube and strainers attached, installing mounting flanges for fuel drains
7/4/01 - Completed inspection panels for aileron actuator components
10/7/01 - Attached aileron ribs to upper aileron skins
Return to main page
Wings, page 2