Locking Bushing (gently pull out on lever to activate) for all toggle switch functions that might cause sound to mute accidentally.

Extensive Headphone Mode/Source options allow DJ to use one or both ears with or without Booth Monitor.
  *1. For rotary potentiometer, CCW=CounterClockWise, CW=ClockWise rotation.
  *2. PGM S(um) = PGM Fader(A+B)+OVR   CUE S(um) = CUE A+B+OVR

MODE	SOURCE	CCW    Left Ear    CW		CCW    Right Ear    CW
PAN	PGM / CUE PGM A/B CUE A/B	MONO PGM S MONO PGM A MONO CUE A	0 0 0	0 0 0	MONO CUE S MONO PGM B MONO CUE B
STEREO	PGM / CUE PGM A/B CUE A/B	PGM S L PGM A L CUE A L	CUE S L PGM B L CUE B L	PGM S R PGM A R CUE A R	CUE S R PGM B R CUE B R
MONO	PGM / CUE PGM A/B CUE A/B	MONO PGM S MONO PGM A MONO CUE A	MONO CUE S MONO PGM B MONO CUE B	MONO PGM S MONO PGM A MONO CUE A	MONO CUE S MONO PGM B MONO CUE B
MSTR EQ	MSTR EQ	MSTR EQ  L	0	0	MSTR EQ R
Also, MIC(1,2) L/R and CUE OVR bypass HEADPHONE FADER in following modes :
PAN	PGM A/B CUE A/B	MONO [MIC(1,2) + CUE OVR]		MONO [MIC(1,2) + CUE OVR]
STEREO	PGM A/B CUE A/B	MIC(1,2) L + CUE OVR L		MIC(1,2) R + CUE OVR R
MONO	PGM A/B CUE A/B	MONO [MIC(1,2) + CUE OVR]		MONO [MIC(1,2) + CUE OVR]
MSTR EQ	N/C	N/C		N/C

Input configuration :

Input #	Signal	Connector	Gain
#1 & #2	Turntable	L/R Phono	RIAA
#3 Select :	Turntable Line Level MIC 3(L) & 4(R)	L/R Phono Mono Phone or XLR Mono Phone or XLR	RIAA 0 dB +15, +35, +55 dB
#4 - #8	Line Level	L/R Phono	0 dB
MIC 1 & 2	Microphone	Mono Phone or XLR	+15, +35, +55 dB
* MIC 1 & 2 are routed directly to MASTER OUT buffer, bypassing the MASTER VOLUME control.  * MIC 1(L) & 2(R) Processor LOOP IN may be used as stereo Line Level input with MASTER VOLUME overide if External Volume Control is supplied.  * OVER PGM Processor LOOP IN may be used as additional Line Level input without additional Volume and Tone buffers.