D-Zolve 298 Paint and Powder Coating Stripper
Designed for use in immersion tank applications, D-Zolve™ 298 has a low viscosity, can be diluted with water and heated to 150° F. It removes chrome-like indium coatings, powder coatings, and hard-to-remove paints such as epoxy primer with cross linked polyurethane top coats from metal and plastic parts. Compatible with aluminum, stainless steels, carbon steels, aircraft metals, TPO and other plastics, D-Zolve 298 contains no methylene chloride and no caustics. It is non-flammable, non-carcinogenic, and has minimal air pollution potential.

Data Sheet

D-Zolve 1220 Paint and Powder Coating Stripper
D-Zolve™ 1220 is similar to D-Zolve 298 except it is high viscosity. It is designed to used either with spray equipment or brush application. D-Zolve 1220 is a quick acting, industrial grade replacement for chlorinated and other hazardous stripping solvents. It is available in as both a liquid and gel. Application of D-Zolve does not require any costly equipment such as burn-off or blasting systems and does not result in the need for wastewater treatment, dust-control, or air scrubbing equipment.

Data Sheet

D-Zolve for Stripping Masking Plugs
D-Zolve removes powder coating buildup from plugs and other standard or custom molded maskings extending the useful live of these devices and reducing replacement costs. Designed to safely remove powder coatings from a wide range of materials such as silicone and neoprene, D-Zolve efficiently removes several layers of buildup from self-threading to dual-flanged pull plugs. When used in an immersion tank, D-Zolve’s special properties lift layers of paint and break the chemical bond between the powder coating and the substrate. When this bond breaks, the paint layers pull away from the surface and fall to the bottom of the tank.

Data Sheet