|
|
|
It all started because I wanted a quick way to build this shack but not having to frame it out like a normal building.
So it hit me use a piecee of wood and cut it to the size I wanted then just hold the siding up to it and trace it then cut it out. Cut the doors and windows then glue to the block.
|
|
|
Here is the second building I`m going to try this way. As you can see that it is a small peace of firewood.
|
|
|
|
|
Here I started cutting it up with just a band saw to get the
desired shape.
|
|
|
Here I cut the roof line out.
|
|
|
|
|
|
As you can see I added the siding to the outside. But before you cut any openings to the siding glue a piece of paper to the back side so when you start to do the cutouts for the doors add widows the wood will not split apart. Now you can cut the doors and windows out and put them in place, paint the block black where the window openings are before you glue the siding on. The roof is just card stock from used note pads that I save. I paid both sides to seal the edge so so it will note curl up on me when I star to add the roofing.
|
|
|
I have finished with the building I named it B&D Taxidermy.
I used my graphics program to make the sign and printed it out using peal and stick paper. I used brass wire to hang the sign because it was easier to soder. The roof is Campbell shingles I applied a row then I would give it a dry brush of grey then add then next row and so on so it would look like cider roofing. I used a pencil on some of the shakes for just a little different contrast.
|
|
HOME